hi. My old snowtent has a bit of delamination on the PU floor. I dont think i can use the Gear Aid product as it requires me to scrub off all the current PU coating, and it is not far enough gone. Could i seal the underneath of the floor (the PU is on the top of the floor) with a silicon/turps mix?
I'm looking for a cheap solution so i can take my kids up snowcamping and see how much of a sucess it is before i buy a new tent.
Reseal PU floor with silicon
Forum rules
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
3 posts
• Page 1 of 1
Reseal PU floor with silicon
by Michaelculhane » Wed 10 Feb, 2016 5:11 pm
- Michaelculhane
- Nothofagus gunnii
- Posts: 13
- Joined: Mon 11 Mar, 2013 6:38 pm
- Region: Australian Capital Territory
- Gender: Male
Re: Reseal PU floor with silicon
by Moondog55 » Wed 10 Feb, 2016 6:09 pm
Yes
After all you have nothing to lose
After all you have nothing to lose
Ve are too soon old und too late schmart
- Moondog55
- Lagarostrobos franklinii
- Posts: 11176
- Joined: Thu 03 Dec, 2009 4:15 pm
- Location: Norlane Geelong Victoria Australia
- Region: Victoria
- Gender: Male
Re: Reseal PU floor with silicon
by Gadgetgeek » Wed 10 Feb, 2016 6:25 pm
its worth a try, but do a test before going all in. If the PU is at all on the other side as well, the dry silicone will just wipe right off.
- Gadgetgeek
- Athrotaxis selaginoides
- Posts: 1209
- Joined: Sun 23 Sep, 2012 4:10 pm
- Region: Queensland
- Gender: Male
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 52 guests