Bushwalk Australia

hi. My old snowtent has a bit of delamination on the PU floor. I dont think i can use the Gear Aid product as it requires me to scrub off all the current PU coating, and it is not far enough gone. Could i seal the underneath of the floor (the PU is on the top of the floor) with a silicon/turps mix?

I'm looking for a cheap solution so i can take my kids up snowcamping and see how much of a sucess it is before i buy a new tent.

Yes
After all you have nothing to lose

its worth a try, but do a test before going all in. If the PU is at all on the other side as well, the dry silicone will just wipe right off.