Page 1 of 1

Gore-Tex & Mould

Posted: Mon 01 Mar, 2010 1:44 pm
by wander
What is a good cleaner to clean mould or mould stains from gore-tex shell wear?

Re: Gore-Tex & Mould

Posted: Mon 01 Mar, 2010 3:52 pm
by Franco
According to this document :

http://cool.conservation-us.org/coolaic ... 11-33.html
Gore Tex is resistant to Hydrogen peroxide.
This from a tent maintenance site :

"To remove mould or mildew, make a 5% solution of hydrogen peroxide. (125ml in 5 litres of water.) Sponge the solution on and, when the mould is gone, rinse off and wash the tent as below. "

So you may want to patch test that to see if it works.

First thing I would wash it according to the instructions here :.

http://www.gore-tex.com/remote/Satellit ... structions

Franco

Re: Gore-Tex & Mould

Posted: Tue 02 Mar, 2010 10:39 am
by wander
Thanks Franco, yes the washing has all been done in accordance with GoreTex Instructions allready but the stain remains. A rolled up hood left in a drying room each night for 2 & 1/2 weeks.

I'll check out the hydrogen peroxide solution.