http://www.javawa.nl/jdm_en.html
http://www.javawa.nl/download.script/software=JaVaWa%20Device%20Manager&lang=en
Zone-5 wrote:WARNING!!!
..be careful because if you use any international characters in text startup screen text file it will BRICK your unit upon restart.
It's bad because it will make the unit's OS inaccessible and reflashing the unit will be your only option!
Aidan wrote:Zone-5 wrote:WARNING!!!
..be careful because if you use any international characters in text startup screen text file it will BRICK your unit upon restart.
It's bad because it will make the unit's OS inaccessible and reflashing the unit will be your only option!
What are international characters?
I better ask having added my name, email and ph. to my startup message
Ive yet to start up my unit as its currently charging
Aidan wrote:I'd like to see if its possible to do this to my Garmin Edge 800.
Strider wrote:Startup.txt is the correct file
Aushiker wrote:Aidan wrote:I'd like to see if its possible to do this to my Garmin Edge 800.
See http://www.dcrainmaker.com/2013/08/disp ... armin.html It is a very simple process of creating a text file and copying it to your GPS unit.
Andrew
Aidan wrote:I used some full stops e.g.. for phone I put ph.
I used a comma as I have one in my name .
I used the @ in my email.
Safe to assume none of these are said "International Characters"![]()
I didn't have "welcome message" in my directory that I could find.
I added mine via "startup txt."
Aidan wrote:Zone-5 wrote:WARNING!!!
..be careful because if you use any international characters in text startup screen text file it will BRICK your unit upon restart.
It's bad because it will make the unit's OS inaccessible and reflashing the unit will be your only option!
What are international characters?
I better ask having added my name, email and ph. to my startup message
Ive yet to start up my unit as its currently charging
Zone-5 wrote:
I have set the display time to 25 seconds so that the display lingers until you manually select the unit to move past it. I did this in the hope that by displaying it longer someone might notice it on startup seeing the backlight remains off during boot.
skog wrote:I tired that GBW, but it didn't seem to keep the contact information on the front screen any longer. I will try it again
<!-- Set the display number to the minimum number of seconds your message is displayed -->
<display = 0>
skog wrote:I tired that GBW, but it didn't seem to keep the contact information on the front screen any longer. I will try it again
Users browsing this forum: No registered users and 1 guest