So, any idea about the best way to remove it, and whether something like Scotchguard will waterproof it again? I tried a test area with straight eucalyptus oil, and that removed it OK, but would be slow and costly to remove it all.
Removing old waterproofing
Forum rules
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
6 posts
• Page 1 of 1
Removing old waterproofing
by ryangus » Wed 23 Jan, 2013 12:05 pm
I have a Kathmandu hiking tent, about 8 years old. It's only been used a couple of times, but when checking it today for an expedition, I noticed all the waterproofing substance is flaking off.
So, any idea about the best way to remove it, and whether something like Scotchguard will waterproof it again? I tried a test area with straight eucalyptus oil, and that removed it OK, but would be slow and costly to remove it all.
So, any idea about the best way to remove it, and whether something like Scotchguard will waterproof it again? I tried a test area with straight eucalyptus oil, and that removed it OK, but would be slow and costly to remove it all.
- ryangus
- Nothofagus gunnii
- Posts: 21
- Joined: Tue 22 Jan, 2013 8:44 pm
- Region: Queensland
Re: Removing old waterproofing
by wayno » Wed 23 Jan, 2013 2:13 pm
that waterproofing layer will be something like a silicon or polyurethane coating applied when the fabric was made. you cant replace that... you can apply a dwr type solution on it to help improve its water resistance. spray on or wash..
but you won't get the same level of water resistance it had with the original coating...
but you won't get the same level of water resistance it had with the original coating...
from the land of the long white clouds...
-
wayno - Lagarostrobos franklinii
- Posts: 8685
- Joined: Sun 19 Jun, 2011 7:26 am
- Location: NZ
- Region: New Zealand
- Gender: Male
Re: Removing old waterproofing
by Orion » Thu 24 Jan, 2013 5:00 am
You might consider a product made by McNett called "Tent Sure". It's a brush-on urethane product designed for recoating tent floors and rain flies. It includes brief instructions on how to remove flakes of old coating. I have a bottle of it, actually, with intention to use it on the floor of my inexpensive car camping tent. But I haven't actually tried it yet so I can't give you any first hand report. If you give it a go let us know if it works.
- Orion
- Athrotaxis selaginoides
- Posts: 1963
- Joined: Mon 02 Feb, 2009 12:33 pm
- Region: Other Country
Re: Removing old waterproofing
by Moondog55 » Fri 25 Jan, 2013 8:23 am
I have a Katmandu tent with the same problem
I have reproofed my Megamid tho and will probably do the same to the little Katmandu tent, I washed my Megamid in the bath with Bi-Carb and ammonia to remove any of the loose flakes and allowed it to dry completely
I then sprayed it in a dilute solution of roofing silicon using a small spray bottle, turned it inside out to spay the inside and allowed it to dry Used about 3 tubes of roofing silicon and a full 4 litre bottle of solvent I can't remember exactly now as i used what I had in the shed for solvent, Shellite, white spirits and mineral turpentine
I have reproofed my Megamid tho and will probably do the same to the little Katmandu tent, I washed my Megamid in the bath with Bi-Carb and ammonia to remove any of the loose flakes and allowed it to dry completely
I then sprayed it in a dilute solution of roofing silicon using a small spray bottle, turned it inside out to spay the inside and allowed it to dry Used about 3 tubes of roofing silicon and a full 4 litre bottle of solvent I can't remember exactly now as i used what I had in the shed for solvent, Shellite, white spirits and mineral turpentine
Ve are too soon old und too late schmart
- Moondog55
- Lagarostrobos franklinii
- Posts: 11176
- Joined: Thu 03 Dec, 2009 4:15 pm
- Location: Norlane Geelong Victoria Australia
- Region: Victoria
- Gender: Male
Re: Removing old waterproofing
by Strider » Fri 25 Jan, 2013 8:54 am
Moondog55 wrote:Used about 3 tubes of roofing silicon
That's a lot of weight added to the tent!
-
Strider - Lagarostrobos franklinii
- Posts: 5875
- Joined: Mon 07 Nov, 2011 6:55 pm
- Location: Point Cook
- Region: Victoria
- Gender: Male
Re: Removing old waterproofing
by Moondog55 » Fri 25 Jan, 2013 9:28 am
Sure, but it means you can continue to use the tent. And the weight is a replacement for the existing coating not in addition to it Don't forget that a lot of the weight in a tube of roofing silicon is the solvent.
Also I think that the surface area of a Megamid is quite large; a smaller tent will use a lot less
Also I think that the surface area of a Megamid is quite large; a smaller tent will use a lot less
Ve are too soon old und too late schmart
- Moondog55
- Lagarostrobos franklinii
- Posts: 11176
- Joined: Thu 03 Dec, 2009 4:15 pm
- Location: Norlane Geelong Victoria Australia
- Region: Victoria
- Gender: Male
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 68 guests