At the risk of being excessively general, I will ensure I ask a specific question. Or perhaps it will be more a statement of dilemma.
Fact: Cuben is more puncture resistant than silnylon.
Fact: Silnylon is more abrasion resistant than cuben.
Dilemma: Which makes a better floor fabric in terms of durability?
I am not fused by the difference of slipperiness, and the cost/weight trade-off is essentially negligible. I am saving weight either way and shave more off with the cuben tarp. I take good care of my kit, so any points on ca requirements are also annulled.
Flooring (cuben or silnylon?)
Forum rules
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
8 posts
• Page 1 of 1
Flooring (cuben or silnylon?)
by oyster_07 » Sat 09 Feb, 2013 9:09 pm
-
oyster_07 - Athrotaxis cupressoides
- Posts: 411
- Joined: Mon 21 Nov, 2011 5:57 am
- Region: Victoria
Re: Flooring (cuben or silnylon?)
by Mark F » Sat 09 Feb, 2013 10:07 pm
If you go the cuben route make sure the floor is 1oz or above as these weights have a double thickness polyester membrane compared to the lighter weights. Cuben is fully waterproof and easily repaired if any pin holes develop while sil-nylon (depending on the source) may leak at pressure points if pitched on wet ground even when new.
"Perfection is attained not when there is nothing more to add, but when there is nothing more to remove".
-
Mark F - Lagarostrobos franklinii
- Posts: 2301
- Joined: Mon 19 Sep, 2011 8:14 pm
- Region: Australian Capital Territory
- Gender: Male
-
John Sheridan - Athrotaxis cupressoides
- Posts: 462
- Joined: Sun 10 Jul, 2011 1:02 am
- Region: New South Wales
- Gender: Male
Re: Flooring (cuben or silnylon?)
by Nuts » Sun 10 Feb, 2013 10:25 am
I'm posting between runs of sewing a cuben floor into my tent, it gets ridiculously difficult to do these things as an afterthought !!
Are you having one made or making? I'd agree with Mark either way. I'm using the heavier (45gsm?) stuff, wouldn't bother with the lighter grades. Easy to repair, waterproof (as in sheet plastic rather than fabric) compared to silnylon.
P/U nylon would be my choice over silnylon.
Are you having one made or making? I'd agree with Mark either way. I'm using the heavier (45gsm?) stuff, wouldn't bother with the lighter grades. Easy to repair, waterproof (as in sheet plastic rather than fabric) compared to silnylon.
P/U nylon would be my choice over silnylon.
-
Nuts - Lagarostrobos franklinii
- Posts: 8555
- Joined: Sat 05 Apr, 2008 12:22 pm
- Region: Tasmania
Re: Flooring (cuben or silnylon?)
by tibboh » Sun 10 Feb, 2013 5:14 pm
John Sheridan wrote:Shower Curtain.
What an awesome idea for a light, cheap and fairly durable groundsheet. I'm off to the tip-shop to pick one up.
"I'd rather be up a mountain"
-
tibboh - Athrotaxis selaginoides
- Posts: 1305
- Joined: Sat 26 Jan, 2013 3:54 pm
- Region: Tasmania
- Gender: Male
Re: Flooring (cuben or silnylon?)
by oyster_07 » Mon 11 Feb, 2013 2:38 am
I'm looking at the MLD Superlight Bivy and also the Bug Bivy. They both come with either a cuben (0.75 oz/sq-yard / 25 grams/sq-m) or silnylon floor.
-
oyster_07 - Athrotaxis cupressoides
- Posts: 411
- Joined: Mon 21 Nov, 2011 5:57 am
- Region: Victoria
Re: Flooring (cuben or silnylon?)
by forest » Mon 11 Feb, 2013 6:39 am
Would you be using the bivi straight on the ground or as I'd imagine over a light ground sheet.
If the later I'd say 0.74 would be okay but if straight on the ground no. I've a fair bit of cuben gear now, no way I would want the 0.74 as a floor without something under it.
If the later I'd say 0.74 would be okay but if straight on the ground no. I've a fair bit of cuben gear now, no way I would want the 0.74 as a floor without something under it.
I am a GEAR JUNKIE and GRAM COUNTER !!
There, It's out. I said it, Ahh I feel better now :lol:
There, It's out. I said it, Ahh I feel better now :lol:
-
forest - Phyllocladus aspleniifolius
- Posts: 858
- Joined: Wed 13 Jul, 2011 9:21 am
- Location: Hunter Valley
- Region: New South Wales
- Gender: Male
Re: Flooring (cuben or silnylon?)
by Mountain Rocket » Thu 14 Feb, 2013 6:18 pm
Ask Ron at MLD for his ideas on the topic. I have always found him to be super helpful.
-
Mountain Rocket - Phyllocladus aspleniifolius
- Posts: 849
- Joined: Sat 27 Aug, 2011 5:46 pm
- Region: Tasmania
- Gender: Male
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 79 guests